All the Solar-Fizz - components can be purchased separately so that they can be implemented in a do-it-yourself solar shower which is adapted to your specific circumstances. The mixer tap may be installed inside and the collectors outside of a building for example.
It may also happen that where you want to shower there is not sufficient solar radiation. This is no problem, as the mixer tap and the collectors only need to be connected to each other with two tubes.
The distance between the collectors and the mixer tap should not exceed 7 meters.
The Solar-Fizz components are coordinated and the installation instructions describe in detail the installation procedure.
The realization of a Solar-Fizz "do-it-yourself" solar shower requires only minimal technical skills.
Technical and color specifications subject to change.
The principle of "unpressurized hot water generation" is explained briefly below. (Click above for the large schema)
When opening the hot water valve (red) fresh tap water flows from below into the collector and presses the already heated water through the "riser" into the shower head.
By opening the cold water valve (blue) fresh tap water flows directly into the shower head, where it is mixed with the hot water.
If you wish more information or if you want to learn more about the Solar-Fizz "Do-it-yourself", do not hesitate to ask for our support. Feel free to contactus.
The Solar-Fizz -Team stays at your disposal for a friendly and competent consulting.